Exhibitors

S-3000, a seeder can seeding fine and small seeds such as turfgrass, alfalfa and canola precisely. S-3000 within unique features developed as an outcome of R&D and real-time testing. It attaches to the tractor with three-point installation system and runs by pulling. There are rollers at the front and back of the seeder. On the rollers, there are steel sharp nails are mounted which is for mainly tillage purposes for hard soil. The main principle of the S-3000, the roller on the front has two features which are open seedbed while cultivating the soil for optimum results. Between two rollers, seeds are making their way to seedbed then the roller on the back of the seeder closes the seedbed and compacts the soil. Moreover, S-3000 is a mixture of different purposes while starts planting, it not only cultivates the soil, does leveling but also ensures proper and homogeneous germination of the seeds by compacting. Depend on soil structure, water can be filled by opening the plug on the sides of the rollers. In this way, as the S-3000 becomes heavier, it will perform better cultivation and compaction. S-3000 ensures to cover tractor wheel tracks with spring harrows which is adjustable by adjustment levers. S-3000 has a significantly large seed tank with a volume of 750 liters. According to seed type, it can handle weight between 660 to 1100 lbs. of seeds. Seed tank indicator, designed to be easily seen from the tractor, has a simple working mechanism. Gearbox which is driven by front roller, drives the gears in the craws and the mixer in the tank. For the calibration, there are craws which is located underneath of seed tank, can be set by craw s covers depend on seed variety. Fine seeds for instance Canola, alfalfa; can be adjusted by putting the size adjustment lever to 0-20, small seeds for instance turfgrass; can be adjusted by size adjustment lever to 20-50. Craw covers can be adjusted by opening them by 1,2,3 levels according to the seed size. Narrow craw covers can be used for such as canola, alfalfa. With gearbox gear shift, it can be easily adjusted the desired amount of seed for planting. Calibration etc. further information, it can be found in USER MANUAL in detail. Check out our website and real-time application videos on our YouTube channel.

As a research results and real-time tests, G-3000 unique and new generation fertilizer application machine which can apply organic fertilizers such as leonardite, vermicompost, chicken manure and derivatives with heterogeneous structure. At the same time, G-3000 can apply mineral granule fertilizer such as Diammonium Phosphate, Urea, and similar and organic-mineral mixture fertilizers. It can apply substance which has difficult fluency such as Magnesium Sulphate, Iron Sulphate and Zinc Sulphate. G-3000 can be attached to the tractor by means of the three-point installation and starts operating with PTO. Works with 75 and higher hp tractor. Hooper capacity various 1700 to 2400 lbs depend on fertilize type. G-300 designed for easy-usage. Hooper can be filled by Big-Bags or backhoe loader or any size sacks. It has 3 sieves in hopper to protect machine from the foreign matter or larger particles in the fertilizer during filling. Organic or other fertilizers can be applied before sowing or planting. Before application, soil preparation should be completed depend on soil type and crop. Clods, soil leveling, slopes can affect tractor speed and speed of application. Tractor speed should be chosen according to soil surface for ideal application. Tractor speed can be 2-6 mile/hour. Needs to be avoided speed, too slow or too fast. First, select the appropriate gear for the tractor to move forward without difficulty. If soil surface and structure is fine, start increasing tractor speed. After, select proper adjustment leveler, and fixed it according to dose rate. Adjustment leveler works to widening or closing holes for calibration. Hole size will reflect pouring amount of fertilizer and dose rate per acre. The mechanism powered by eccentric shaft. Mechanism works like a sieve with the pull-push movement. Any heterogeneous materials flow down easily without being stuck due to this movement and vibration. G-3000; a unique machine that makes homogeneous application exactly where should be without being affected by the wind, dusting, tossing it left and right. As soon as the PTO shaft stops, the pouring holes are closed automatically, the fertilizer does not flow in vain, therefore no fertilizer loss. Settings, maintenance etc. and detail information can be found in USER MANUAL. For further information, you can visit our website and check out our real-time application videos from our YouTube channel.