Exhibitors

Double disc fertilizer spreaders, which are manufactured as hanging and pull type, are manufactured between 900 liters and 3500 liters. Fertilizer spreaders can be controlled hydraulically and you can dispose of fertilizer separately by right and left side thanks to hydraulic valve. Thanks to the hydraulic control arm, fertilizer spreading is made very easily from the tractor cab at the beginning of the border and are closed rapidly to prevent unnecessary use of fertilizer. Working width of the machine varies between 10 and 36 m, Optionally, you can adjust the working width depending on the disc and wing length you will buy. Fertilizer spreading distance may vary depending on the type of fertilizer. The bottom of the fertilizer tank is divided into two by an inverted V-shaped separator sheet and the flow of the fertilizer is ensured uninterruptedly with the vertical mixer inside.

HMS PNEUMATIC PRECISION SOWING MACHINES WITH DISC allow seed to be sowed precisely in the desired sowing range and intra-row distance. It is manufactured with 4-6-8 rows optionally. Seed bed is opened with the help of discs in sowing units. Each sowing unit consists of 2 discs made of special material. It can operate in fields with processed or semi-processed stem remains thanks to cutter discs that can be attached to front side of chassis and disc type sowing units. Because movement obtained from wheel is transmitted to sowing units by shaft mechanism, precision sowing can be performed in intra-row distances. Due to rubber wheels located on both sides of the Sowing Units, precise Depth adjustment can be made in all kinds of soil conditions. V which is located at the rear of seed unit can be tightened by means of pressure wheels. Pressure applied by rear pressure wheel and angle can be adjusted by means of spring. V pressure wheels prevent formation of duff layer on the soil. Disc type sowing units allow sowing in early temper. Pneumatic sowing machines with disc legs are suitable for sowing ridges. They do not ruin ridges. Because seed bed is opened by turning discs, it does not harden. It is suitable for plant development and does not put much load on tractor. Units can be switched to road and operating status at any time easily. Different accessories can be mounted optionally. It is a sowing machine that saves time and provides high efficiency with high operating speed and excellent performance.

Double disc legs consist of two flat discs having a certain angle between them. The joint point of disks is located at front side and a little over the groove bottom. Seed hopper was placed in the space between discs expanding rearward. Even if these are disc legs, they open grooves pushing the soil to the aside same as axe legs. However, groove size is wider. Most of the seeds are sowed in the same depth and covered with moist soil pushed aside. Height of this ridge increases as the groove expands and becomes as if it is sowed in a row. Double disc legs can be used in all kinds of climate and soil conditions due to these properties.